VP 55 CNC


 

USE

The roll feeder VP 55 CNC is designed for feeding coil strip into the working space of metalforming machines. It is suited for curent metalforming operations such as blanking, punching, bending etc. and realize a high degree of feed length precision. The feeder can be attached without much demands to a current forming machine working separately or integated in forming lines.

DESIGN

In the feeder box are mounted the feeding elements, gearing, drive, pneumatic elements, mechanisms for adjustement of the feed to a specific thicknes and width of the strip. All rotary elements are mounted in roll bearings and do not need lubrication. The feeder is fitted with an independent measuring system (risk of material slip). For a tool with pilot pins it is possible to release the stock after each feed step. Communication with the operator (program editing, error indication, daily and total counting) is via the control panel.

TECHNICAL PARAMETERS

 

Maximum width of feed material 50 mm
Maximum thicknes of feed material 5 mm
Maximum feeding speed 225 m/min
Feed length tolerance ±0,05 mm
Overall dimensions - width x depth x height 335x650x465 mm
Range of feed lengths 0,019999,99 mm
Setting of feed speed 5100 %
Mass 90 kg
Connection voltage 3x400 V
Input power 2,8 kW
Air pressure 0,6 MPa

« Back | Whole Page  | Top ^