The roll feeder VP 405
CNC is designed for feeding coil strip into the working
space of metalforming machines. It is suited for curent metalforming
operations such as blanking, punching, bending etc. and realize a high
degree of feed length precision. The feeder can be attached without
much demands to a current forming machine working separately or
integated in forming lines. The specific application of the feeder
should be preferably consulted with the manufacturer.
In the feeder box are
mounted the feeding elements, gearing, drive, pneumatic elements,
mechanisms for adjustement of the feed to a specific thicknes and
width of the strip. All rotary elements are mounted in roll bearings
and do not need lubrication. The feeder is program-controlled. In each
program step it is possible to set the length and speed of feed step
and also the press start and speed if necessary. Communication with
the operator (program editing, error indication, daily and total
counting) is via the control panel.
On customer's
requirement we supply:
- increased feed acuracy up to ±0,01 mm
- independent measurement (in case of risk of material slip)
- intermediate mounting plate for easy attachment of the feeder to the
press
- separate stand if the feeder cannot be mounted directly onto the
press
- special software and hardware outfit (control of the feeder directly
from the PC)
- loop
control (optical reflex sensors with polarizing filter)
|