|
|||
Brochure (size 168 kB)
The LLCV 5 is a one-point toggle-lever pneumatic press with top drive and run-out table designed for small presswork whitch requires manual loading of preforms without possibility of using technological appliances.
The basic portion of the press is a welded frame dimensionally stabilized by annealing and in whitch is arranged a roll-mounted slide, the toggle-lever mechanism for driving the slide and a run-out table receiving the lower tool half. All mechanisms are controlled by pneumatic elements. The lower tool portion receiving the preform, can be vacuumized. Pressure air permits easy removal of the finished cut-out blank from the tool. The operator's working space is enclosed by guards which together witch a two-hand release ensures perfect operator safety. The press is controlled by a freely programmable automatic, allowing via the operating panel to change the technological modes with possible diagnosing of its faults. The number of parts are registered by both day and total counters.
|
Nominal press capacity | 50 | kN |
Number of strokes | 15 | 1/min |
Slide stroke at 150 shut height | 50 | mm |
Throat | 135 | mm |
Shut height | 150 | mm |
Slide adjustment | 10 | mm |
Mounting surface of slide | 180x155 | mm |
Mounting surface of table | 250x250 | mm |
Overall dimensions - width x depth x height | 850x980x1370 | mm |
Mass | 450 | kg |
Connection voltage | 230 | V |
Input power | 0,12 | kW |
Air pressure | 0,6 | MPa |
Air consumption per 1 working cycle | 30 | l |
« Back | Whole Page | Top ^ |